100kN – 300kN Cometech QC-501-503 Floor Type UTM
Views: 1552
$0.00
Stay Ahead of Competition and Affordable all in one testing machine
With Our M2F software, which is compiled with Microsoft Windows 7/8/10. It’s capable of tensile, compression, bending test and all kind of tests. The software has multi-languages and is very easy to handle. Not only does it has all kind of metric units and real-time graphics but it also provides complete analysis test data which can do variety of material analysis after the test.
The separate design of UTM and controller make maintenance a lot easier. Decrease the maintenance fee efficiently, and greatly extend the life time of machine.
The speed of M2F system is capable for 0.0001-375mm/min to increase the testing range and satisfy more standard requirement
Description
Stay Ahead of Competition and Affordable all in one testing machine
With Our M2F software, which is compiled with Microsoft Windows 7/8/10. It’s capable of tensile, compression, bending test and all kind of tests. The software has multi-languages and is very easy to handle. Not only does it has all kind of metric units and real-time graphics but it also provides complete analysis test data which can do variety of material analysis after the test.
The separate design of UTM and controller make maintenance a lot easier. Decrease the maintenance fee efficiently, and greatly extend the life time of machine.
The speed of M2F system is capable for 0.0001-375mm/min to increase the testing range and satisfy more standard requirement.
Specification
Max Capacity |
300kN |
Space between columns |
550mm (680mm、800mm for option) |
Units |
Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Stress: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg Length:m, cm, mm, ft, in |
Force Resolution |
31 bits |
Force Precision |
1/100,000 |
Test Stroke(w/o grip) |
1100 mm |
Stroke resolution |
0.0001 mm |
Speed Range |
0.0001~375 mm/min |
Speed Accuracy |
Lower 1% |
PC-Port |
RJ45(TCP/IP) |
Data sampling rate |
1200Hz (Max.) |
Real Time Data |
Force Display/ Displacement Display/ Time Display/ Stress Display/ Strain Display ( Selectable) |
Analysis Data |
Over 260 |
Test end |
Automatic detection of breaking, and also automatic return can be select. |
Motor Type |
Servo Motor |
Rigidity |
4.1 kN/mm (Vertical Rigidity) |
Test Methods |
Tensile, Compression, 3p bend, 4p bend L/2, 4p bend L/3, Creap, Spring Test ( Compress), Spring Test ( Tensile), Defined Test, 180˚ peel, Foam Test, KES-FB3、JIS L1096, Chang Rate Test |
Hardware Protection |
✓ Over load protection ✓ Over stroke protection ✓ Over time protection ✓ Up/Down limit ✓ Emergency Stop ✓ Anti-collision function( At 1000mm/min speed, load cell capacity that is over 50kg will not be overload, but load cell brand should be appointed by Cometech) |
Feature |
✓ Force, displacement, time, stress and starin disply in real time. ✓ The calibration parameter is recorded automatically in the loadcell. When it is replaced, no adjustment is required. ✓ The displacement sensor can be recognized by the controller automatically. When it is replaced, no complicated setting is required. ✓ User-friendly test settings: moving direction, force/displacement zeroed automatically, test speed, pause are adjustable. ✓ Automatic return after the test. ✓ Machine protection by over force, over time, over displacement, etc. ✓ The jog precisely controls displacement. 8. Optional display is available for stand-alone mode. ✓ In user defined mode, cyclic test and test in a long duration can be achieved. |
Power Supply |
Single phase 200V -240 V, 5A |
Dimension |
135 X 60 X 220cm |
Weight |
800 kg |
Conforms Standards
- ISO 7500-1
- ASTM E4
- ASTM D-76
- DIN 5122
- JIS B7721
- JIS B7733
- BS EN 1002-2
- BS 1610
- GB/T 228
Application
- ASTM D790, ISO 178 Bending test
- ASTM D638 Plastic Tensile Test
- ASTM D412 Rubber Tensile Test
Industry
- Plastic
- Textile
- Metal
- Architecture
Downloads Datasheet
QC-501M2F_502M2F_503M2F (100-300kN) Computerized Tensile (Compression) Testing Machine – Advanced
Reviews
There are no reviews yet.