Flammable Gas Detector / Combustible Gas Detector PCE-FGD series
Views: 2234
$0.00
Description
Flammable Gas Detector / standard signal output / IP65
robust housing / sensor element interchangeable
The Flammable Gas Detector of the PCE-FGD series can be used in a variety of ways to protect against explosive atmospheres. With more than 20 different flammable gases that can be monitored, almost all applications will be covered. Whether in industry, research or development, the Flammable Gas Detector of the PCE-FGD series always ensures continuous safety. The risk of an explosive atmosphere being formed is significantly minimized with this Flammable Gas Detector.
The integrated standard signal output from the Flammable Gas Detector is compatible with any common process display, display recorder or process control. The evaluation of the measurement signal of this gas warning device can thus be easily integrated into existing processes. It is also possible to pass on the measurement signal to existing gas warning systems with standard signal input and potential-free contacts. Due to the IP65 degree of protection and the robust ABS plastic housing, harsh environmental conditions are no problem.
The mechanical installation of the Flammable Gas Detector of the PCE-FGD series is very simple due to the compact housing. This can be carried out directly via corresponding mounting holes in the housing or through optionally available wall brackets or mounting plates. Commissioning, maintenance or replacement of the sensor elements of the gas warning devices can be carried out quickly and easily by PCE service technicians.
– sensors for flammable gases
– Degree of protection IP65
– Standard signal output 4 … 20 mA / 2 … 10 V
– Interchangeable sensor element
Specification
| Technical specification for the gas detector PCE-FGD series | |
| Electrical | |
| Supply voltage | 16 … 29 V DC, reverse polarity protected |
| Power consumption (at 24 V DC) | |
| flammable gases | approx. 75 mA |
| Analog output | 4 … 20 mA or 2 … 10 V |
| Proportional, overload and short-circuit proof | |
| burden | ≤ 500 Ω with current signal |
| ≥50 kΩ with voltage signal | |
| Underrange | <3.2 … 4 mA or <1.6 … 2 V |
| Measuring range exceeded | > 20 … 21.2 mA or> 10 … 10.6 V |
| Disorder | 2 mA or 1 V |
| High fault | > 21.8 mA or 10.9 V |
| Mechanically | |
| casing | Polycarbonate |
| (Sensor element optionally made of stainless steel) | |
| Burning behavior | UL 94 V2 |
| Housing color | |
| Sensor element | RAL 7032 |
| casing | RAL 7024 |
| Dimensions | 125 x 113 x 62 mm |
| Degree of protection | IP65 |
| Assembly | Screw mounting |
| Connection type sensor | Screw terminal min. 0.25 mm²; Max. 1.3 |
| mm², 3-ploig | |
| Cable entry | M12, black, plastic |
| Weight | approx. 180 g |
| General sensor | |
| Sensor element | |
| flammable gases | catalytic |
| Pressure range | Atmosphere ± 10% |
| storage time | |
| flammable gases | 6 months |
| Operating conditions | -20 … +65 ° C |
| Storage conditions | +5 … +30 ° C |
| 10 … 95% RH non-condensing | |
Delivery Scope
1 x Flammable Gas Detector PCE-FGD-FLAME
1 x calibration certificate
1 x instruction manual
1 x calibration certificate
1 x instruction manual
