Name: 20kN Cometech QC-506 Table Type UTM
SKU: 6816
Availability: InStock

20kN Cometech QC-506 Table Type UTM

$0.00

Stay Ahead of Competition and Affordable all in one testing machine

The table type has large test space and long stroke. Multiple model of width can satisfy large specimen test requirement. The maximum test capacity is 20 kN with high precision, low noise and maintenance-free of servo drive system.
Maintenance-free transmission mechanism to reduce machine maintenance problems and in the same time it provides a quiet test environment and high-precision test results

Support precision jog wheel can be fine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy.
High-speed signal feedback mechanism can reduce the chance of machine overload. The reserved external signal can be connected to an external signal source, increasing machine control mode

Description

Stay Ahead of Competition and Affordable all in one testing machine

Specification

Max Capacity	20kN
Space between columns	425mm (500mm, 680mm, 800mm for option)
Units	Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Stress: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg Length:m, cm, mm, ft, in
Force Resolution	31 bits
Force Precision	1/100,000
Test Stroke(w/o grip)	800 mm
Stroke resolution	0.0001 mm
Speed Range	0.0002~830 mm/min
Speed Accuracy	Lower 1%
PC-Port	RJ45(TCP/IP)
Data sampling rate	1200Hz (Max.)
Real Time Data	Force Display/ Displacement Display/ Time Display/ Stress Display/ Strain Display ( Selectable)
Analysis Data	Over 260
Test end	Automatic detection of breaking, and also automatic return can be select.
Motor Type	Servo Motor
Rigidity	4.1 kN/mm (Vertical Rigidity)
Test Methods	Tensile, Compression, 3p bend, 4p bend L/2, 4p bend L/3, Creap, Spring Test ( Compress), Spring Test ( Tensile), Defined Test, 180˚ peel, Foam Test, KES-FB3、JIS L1096, Chang Rate Test
Hardware Protection	✓ Over load protection ✓ Over stroke protection ✓ Over time protection ✓ Up/Down limit ✓ Emergency Stop ✓ Anti-collision function( At 1000mm/min speed, load cell capacity that is over 50kg will not be overload, but load cell brand should be appointed by Cometech)
Feature	✓ Force, displacement, time, stress and starin disply in real time. ✓ The calibration parameter is recorded automatically in the loadcell. When it is replaced, no adjustment is required. ✓ The displacement sensor can be recognized by the controller automatically. When it is replaced, no complicated setting is required. ✓ User-friendly test settings: moving direction, force/displacement zeroed automatically, test speed, pause are adjustable. ✓ Automatic return after the test. ✓ Machine protection by over force, over time, over displacement, etc. ✓ The jog precisely controls displacement. 8. Optional display is available for stand-alone mode. ✓ In user defined mode, cyclic test and test in a long duration can be achieved.
Power Supply	Single phase 200V -240 V, 5A
Dimension	95 X 58 X 151cm
Weight	145 kg