Cometech QC-636 Drop Weight Impact Tester
Views: 1386
$0.00
Stay Ahead of Competition and Affordable all in one testing machine
This tester conforms to test standard applicable for method A and method B. The plastic film is clamped pneumatically on around the specimen holder (Ø
127mm) in an instant. The impact head used in method A is
Ø 38.1mm and in method B is Ø 50.8mm. The dart is fixed top the tester. After the dart is selected and the height is adjusted, release the dart with the electronic magnet. Film’s resistance to impact can thus be tested. Generally, 1 specimen is tested at a time and after 20 tests, record height and dart weight under broken and unbroken conditions for every test. This serves as a reference to the film’s resistance to impact.
Description
Stay Ahead of Competition and Affordable all in one testing machine
QC-636 Drop Weight Tester is suitable for the tests of cushioning material. It is equipped with a standard drop striker weighted 5kg. Normally the drop height is 100cm, which can cause about 50 joules of energy to fall vertically and hit the sample.
This machine can read remaining energy absorbed by the sample be impacted by 50 joules of force. It measures the impact-absorbing capacity of packaging material used to protect personnel and sophisticated items from injury or damage.
This machine can read remaining energy absorbed by the sample be impacted by 50 joules of force. It measures the impact-absorbing capacity of packaging material used to protect personnel and sophisticated items from injury or damage.
Specification
Max. Height |
210cm |
Test Weight |
5Kg |
Capacity |
100J |
Force Sensor |
1. Minimum precision is 1kN when force is higher than 125kN. 2. Sampling rate is 8,000 Hz at most. |
Features |
1.Can switch between Impact method A/B. 2.Weight lifting by electric method. 3.The weight is controlled by electromagnet under proper safety design. 4.In case of power-off, the weight will not be released and pose a danger. 5.Low-resistant guiding tracks are used for weight movement. The software analyzes the test and displays data. |
Accessory |
Software |
Dimension |
84x56x275cm |
Conforms Standards
- ASTM D256
- ATM D6119
- ASTM E23
- ISO180
- ISO148, EN10045-1
- ISO179
- ISO13802
Industry
- Sports
- Packaging
Reviews
There are no reviews yet.